Deze website gebruikt cookies. Klik hier voor meer informatie.
Onze producten
0

Vragen of inkooporder?
info@ddselectronics.nl

excl.incl.
BTW

Elnec SmartProg2 programmer

Smartprog2 eprom programmer van Elnec
    Artikelnr:60-0038
                        439,-
                        Aantal:
                        Voeg toe aan winkelmandje
                        Beschikbaarheid:
                        Op bestelling
                        • Levertijd +/- 5 werkdagen
                        Omschrijving en specificaties

                        Omschrijving

                        Elnec BeeProg2 extreem snelle USB/LPT aangesloten programmer.

                        60-0038

                        Belangrijkste Eigenschappen
                        * Meer dan 37187 ondersteunde devices van 252 verschillende fabrikanten (dagelijks wordt dit aantal groter)
                        Kleine, snelle en krachtige programmer.
                        * DIL40 ZIF socket aansluiting, geen adapters nodig voor DIL devices tot 40 pins
                        * ISP connector voor in-circuit-programming
                        * PC aansluiting: USB
                        * USB 2.0 (full speed, and 1.1 compatible interface
                        * Duidelijk en makkelijk te bedienen software die met alle versies van Microsoft Windows werkt (van Windows 2000 tot Windows 8.1 (32bit en 64bit)
                        * Voeding, aansluitkabel en software inclusief.
                        * Voorzien van een CE keuring
                        * 3 jaar garantie


                        Features

                        GENERAL
                        • SmartProg2 is the next member of new generation MS Windows (from Windows 2000 to Windows 8 32-bit and 64-bit) based ELNEC universal programmers. Programmer is built to meet the demands of development labs and field engineers for universal, but portable programmer.
                        • SmartProg2 is a small, fast and powerful programmer of all kinds of programmable devices. Using build-in in-circuit serial programming (ISP) connector the programmer is able to program ISP capable chips in-circuit. SmartProg2 isn't only a programmer, but also a static RAMs tester.
                        • Provides very competitive price with excellent hardware design for reliable programming. Nice "value for money" in this class.
                        • Very fast programming due to high-speed FPGA driven hardware and USB 2.0 full speed port.
                        • SmartProg2 interfaces with any IBM PC compatible personal computers, running MS Windows OS, through USB (2.0 HigSpeed) port, what is important for new, LPT-port-less computers (notebooks for example).

                         

                        HARDWARE
                        • 40 powerful TTL pindrivers provide H/L/pull_up/pull_down and read capability for each pin of socket. Advanced pindrivers incorporate high-quality high-speed circuitry to deliver signals without overshoot or ground bounce for all supported devices. Pin drivers operate down to 1.8V so you'll be ready to program the full range of today's advanced low-voltage devices.
                        • The programmer performs device insertion test (wrong device position in socket) and contact check (poor contact pin-to-socket) before it programs each device. These capabilities, supported by signature-byte check help prevent chip damage due to operator error.
                        • SmartProg2 programmer performs programming verification at the marginal level of supply voltage, which, obviously, improves programming yield, and guarantees long data retention.
                        • Various programming adapters are available to handle device in PLCC, SOIC, SSOP, TSOP, TSSOP, TQFP, QFN (MLF) and other packages.



                        SOFTWARE
                        • Programmer is driven by an easy-to-use control program with pull-down menus, hot keys and on-line help. Selecting of device is performed by its class, by manufacturer or simply by typing a fragment of vendor name and/or part number.
                        • Standard device-related commands (read, blank check, program, verify, erase) are enhanced by some test functions (insertion test, signature-byte check), and some special functions (autoincrement).
                        • All known data formats are supported. Automatic file format detection and conversion during loading of file.
                        • The rich-featured autoincrement function enables one to assign individual serial numbers to each programmed device - or simply increments a serial number, or the function enables one to read serial numbers or any programmed device identification signatures from a file.
                        • The software also provide a many information about programmed device. As a special, the drawing of all available packages are provided. The software provide also explanation of chip labelling (the meaning of prefixes and suffixes at the chips) for each supported chip.
                        • The software provide a full information for ISP implementation: Description of ISP connector pins for currently selected chip, recommended target design around in-circuit programmed chip and other necessary information.

                         

                        CARE FOR THE CUSTOMERS

                        • New Device Request (AlgOR Service)
                          • You can ask for new devices support using our AlgOR service. Please see AlgOR (Algorithm On Request) service for details.

                         

                        • Free life-time software updates
                          • Most current version of Elnec programmers software with support of newly added devices is available for free here.

                         

                        • Free Technical support
                          • Elnec provide customers technical support (WebForm/e-mail based).

                         

                        • Keep-Current service
                          • Keep-Current service means, that ELNEC ships the latest version of programmer software and updated user documentation (Keep-Current package) to customer . The Keep-Current service is your hassle-free guarantee that you achieving the highest quality programming on ELNEC programmers, at minimal cost.

                         

                        • Prompt delivery
                          • Combination of extensive stock, flexible manufacturing and shipping of Elnec products by world class carriers (like DHL) warrants customers very fast and secure delivery of ordered Elnec products. Products ordered before 10 a.m. (CET) will be dispatched the same working day (if products are in stock and the payment is done by Online payment (CardPay, PayPal).

                         

                        • Warranty
                          • Advanced design of the SmartProg2programmer, careful manufacturing and burning-in allow us to provide a three-year warranty on parts and workmanship of the programmer (limited 25 000-cycle warranty on ZIF sockets).
                          • Elnec provides free shipping of programmer repaired under warranty back to customer world wide. Warranty is valid from the date of purchase.
                          • Preferential handling of repair requests ensures registration of the product that should be done within 60 days from the date of purchase here.

                        Technische specificaties

                          Coax:
                            Antenne montage:
                              Krimpkous:
                                Geen specificaties:
                                  Bliksembeveiliger:
                                    Antenne splitters:
                                      Overig-inhoud:
                                        Krimptang:
                                          Antenne:
                                            voedingen:
                                              Koffers:
                                                Connector:
                                                  Verloopconnector:
                                                    Verloopkabel:
                                                      test:
                                                        Overig:
                                                          Afmetingen:

                                                            HARDWARE

                                                            Programmer

                                                            • two D/A converters for VCCP and VPP, controllable rise and fall time
                                                            • VCCP range 2V..7V/350mA
                                                            • VPP range 2V..25V/200mA
                                                            • USB 2.0/1.1 compatible interface
                                                            • autocalibration
                                                            • selftest capability

                                                            ZIF socket, pindriver

                                                            • 40-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 40-pins
                                                            • pindriver: 40 TTL pindrivers, specialized GND/VCC/VPP pindriver
                                                            • FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins; level H selectable from 1.8V up to 5V
                                                            • continuity test: each pin is tested before every programming operation

                                                            ISP connector

                                                            • 10-pin male type with missinsertion lock
                                                            • 5 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from 1.8V up to 5V to handle all (low-voltage including) devices.
                                                            • 1x VCCP voltage (range 2V..7V/100mA) (*1) and 1x VPP voltage (range 2V..25V/50mA)
                                                            • programmed chip voltage (VCCP) with both source/sink capability and voltage sense
                                                            • (*1) - the programmer is not capable to supply a target system from VCCP pin. If you have such demand, use please a BeeProg programmer

                                                             

                                                            DEVICE SUPPORT

                                                            Programmer, in ZIF socket

                                                            • EPROM: NMOS/CMOS, 27xxx and 27Cxxx series, with 8/16 bit data width, full support of LV series (*1*2)
                                                            • EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series, with 8/16 bit data width, full support of LV series (*1*2)
                                                            • Flash EPROM: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series, with 8/16 bit data width, full support of LV series (*1*2)
                                                            • Serial E(E)PROM: 24Cxxx, 24Fxxx, 25Cxxx, 25Bxxx, 25Dxxx, 59Cxxx, 25Fxxx, 25Pxxx, 25Qxxx, 85xxx, 93Cxxx series, AT88SCxxx, full support for LV series (*1)
                                                            • Configuration (EE)PROM: XCFxxx, 37LVxx, XC17xxxx, EPCxxx, AT17xxx, LV series including
                                                            • NV RAM: Dallas DSxxx, SGS/Inmos MKxxx, SIMTEK STKxxx, XICOR 2xxx, ZMD U63x series
                                                            • PLD: series: Atmel, AMD-Vantis, Cypress, ICT, Lattice, NS, ... (*1)
                                                            • Microcontrollers 51 series: 87Cxxx, 87LVxx, 89Cxxx, 89Sxxx, 89LVxxx, 89LSxxx, 89LPxxx, LPC series from Atmel, Atmel W&M, Intel, Philips, SST, Winbond (*1*2)
                                                            • Microcontrollers Atmel AVR: rady AT90Sxxxx, AT90pwm, AT90can, AT90usb, ATtiny, ATmega, (*1*2)
                                                            • Microcontrollers Cypress: CY8Cxxxxx
                                                            • Microcontrollers ELAN: EM78Pxxx
                                                            • Microcontrollers EM Microelectronic: 4 and 8 bit series
                                                            • microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17Cxxx, PIC18xxx, dsPIC series, 8-40 pins (*1*2)
                                                            • microcontrollers Scenix (Ubicom): SXxxx series
                                                            • Microcontrollers Silicon Laboratories(Cygnal): C8051 series
                                                            • Microcontrollers other: ASP, Macronix, Princeton, EXODUS Microelectronic, Goal, Ramtron, Topro, VersaChips, Winbond

                                                            Programmer, through ISP connector

                                                            • Serial E(E)PROM: IIC series, MW series, SPI series, KEELOQ series, serial data Flash
                                                            • Microcontrollers Atmel AVR: AT89Sxxx, AT90Sxxxx, AT90pwm, AT90can, AT90usb, ATtiny, ATmega, AT89LSxxx, AT89LPxxx
                                                            • Microcontrollers Cypress: CY8C2xxxx
                                                            • Microcontrollers Elan: EM78Pxxx
                                                            • Microcontrollers EM Microelectronic: 4 and 8 bit series
                                                            • Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17xxx, PIC18xxx, dsPIC series
                                                            • Microcontrollers Philips: LPC series
                                                            • Microcontrollers Silicon Laboratories(Cygnal): C8051 series

                                                            Notes:

                                                            • (*1) - suitable adapters are available for non-DIL packages
                                                            • (*2) - there exist only a few adapters for devices with more than 40 pins. Therefore, please, consider a more powerful programmer (LabProg+, BeeProg, JetProg), if you need to program devices with more than 40 pins
                                                            • for all supported devices see actual DEVICE LIST

                                                            I.C. Tester

                                                            • Static RAM: 6116 .. 624000

                                                            Programming speed

                                                            Device

                                                            Operation

                                                            Mode

                                                            Time

                                                            27C010

                                                            programming and verify

                                                            in ZIF

                                                            28 sec.

                                                            AT29C040A

                                                            programming and verify

                                                            in ZIF

                                                            32 sec.

                                                            AM29F040

                                                            programming and verify

                                                            in ZIF

                                                            62 sec.

                                                            PIC16C67

                                                            programming and verify

                                                            in ZIF

                                                            10 sec.

                                                            PIC18F452

                                                            programming and verify

                                                            in ZIF

                                                            7 sec.

                                                            AT89C52

                                                            programming and verify

                                                            in ZIF

                                                            16 sec.

                                                            PIC16F876A

                                                            programming and verify

                                                            ISP

                                                            5 sec.

                                                            PIC12C508

                                                            programming and verify

                                                            ISP

                                                            3 sec.

                                                            Conditions: P4, 2.4 GHz, USB 2.0 high speed, Windows XP.
                                                            The programming times are valid for 2.11 version of software, the improvement is in progress.

                                                             

                                                            SOFTWARE

                                                            Algorithms: only manufacturer approved or certified algorithms are used. Custom algorithms are available at additional cost.

                                                            Algorithm updates: software updates are available approx. every 2 weeks, free of charge.

                                                            Main features: revision history, session logging, on-line help, device and algorithm information.

                                                            Device operations

                                                            • standard:
                                                              • intelligent device selection by device type, manufacturer or typed fragment of part name
                                                              • blank check, read, verify
                                                              • program
                                                              • erase
                                                              • configuration and security bit program
                                                              • illegal bit test
                                                              • checksum
                                                            • security
                                                              • insertion test
                                                              • contact check
                                                              • ID byte check
                                                            • special
                                                              • auto device serial number increment
                                                              • statistic
                                                              • count-down mode

                                                            Buffer operations

                                                            • view/edit, find/replace
                                                            • fill, copy, move, byte swap, word/dword split
                                                            • checksum (byte, word)
                                                            • print

                                                            File load/save

                                                            • no download time because programmer is PC controlled
                                                            • automatic file type identification

                                                              Supported file formats
                                                              • unformatted (raw) binary
                                                              • HEX: Intel, Intel EXT, Motorola S-record, MOS, Exormax, Tektronix, ASCII-SPACE-HEX

                                                             

                                                            GENERAL

                                                            PC system requirements

                                                            Operation

                                                            • operating voltage 15..20V DC, max. 0.5A
                                                            • power consumption max. 6W active, about 1.4W sleep
                                                            • dimensions 160x95x35 mm (6.3x3.7x1.4 inch)
                                                            • weight (without external power adapter) ca. 500g (17.65 oz)
                                                            • operating temperature 5°C ÷ 40°C (41°F ÷ 104°F)
                                                            • operating humidity 20%..80%, non condensing

                                                            Base configuration package includes

                                                            • SmartProg2 programmer
                                                            • switch. power adapter, 15V DC/500mA, stabilized + power cord
                                                            • connection cable PC-programmer
                                                            • ISP cable
                                                            • diagnostic POD for selftest of the programmer
                                                            • anti-dust cover for ZIF socket
                                                            • user manual (on CD)
                                                            • software
                                                            • transport case (cardboard box)

                                                            Additional services

                                                            • Keep Current - ELNEC sends to user the latest version of programmer software and updated user documentation (Keep-Current package)
                                                            • AlgOR (Algorithms On Request) - add new supported devices on customer request

                                                            Programmer price also includes

                                                            • free technical support (WebForm/e-mail based)
                                                            • free life-time software update via Internet


                                                            The information in this document is subject to change without notice

                                                            Meer informatie

                                                            Klanten kochten ook:

                                                              https://www.ddselectronics.nl/webshop/winkelmandje/
                                                              • Snelle levering

                                                                uit de voorraad leverbaar
                                                              • Eigen productie

                                                                importeur / distributeur
                                                              • Maatwerk

                                                                antennes, kabels en koffers
                                                              • Advies

                                                                altijd vrijblijvend
                                                              • Vertrouwd

                                                                actief sinds 1997

                                                              Prijswijzigingen, tekst-, zet- en prijsfouten voorbehouden.

                                                              ©2023 DDS Electronics Europe BV | Ontwikkeld door SatDesign

                                                              DDS Electronics Europe B.V. is een onderdeel van de MCS Group